BMW F850GS Forum

Please login or register.

News: A big welcome to all new members !

Author [NL] [FR] [ES] [DE] [SE] [IT] [NO] [MY] Topic: Powerbronze Hot Product - F850GS Rear Hugger  (Read 472 times)

0 Members and 1 Guest are viewing this topic.

Offline RichardPB

  • Approved Vendor
  • GS Member
  • *****
  • Posts: 11
  • Town / City: Rustington
  • Country: gb
Powerbronze Hot Product - F850GS Rear Hugger
« on: April 17, 2020, 01:19:15 PM »
Hi Everyone,

I hope you are all well ?

Have you seen the stylish Powerbronze rear hugger for your F850GS ?

A must have product for your bike, huggers are designed to enhance the look of your bike while offering the practical advantage of reduced spray over the rear end of your machine.

- Made from High impact plastic for a smooth internal finish.
- No cutting or modification
- Supplied with bike specific fitting kit
- Designed and manufactured by Powerbronze in Great Britain
- "Posi-Flex" steel sleeved rubber mounting points to dampen vibration and avoid stress cracking
- Does not require painting
- UV protected to avoid sun damage
- Same day dispatch if ordered before midday (*)
- International shipping available
- Order with confidence direct from the manufacturer
- TUV & ABE Approved

* In stock items only 

Click here to order from our UK website :
https://www.powerbronze.co.uk/bmw-f750gs-18-19-f850gs-18-19-300-b110.html





Enter discount code UKFORUM1 to claim your 10% off at the cart page as shown in the screenshot below.



Free UK mainland delivery on orders over £100.

Please ensure you enter a contact telephone number on all orders.

Stay safe everyone.

All the best,
Richard

Offline keefcambs

  • GS Member
  • **
  • Posts: 12
  • Bike: GS 850 2020
  • Town / City: Peterborough
  • Country: gb
Re: Powerbronze Hot Product - F850GS Rear Hugger
« Reply #1 on: October 21, 2020, 11:10:47 AM »
Powerhouse - Just ordered this and the front mudguard extension - got you're 10% discount and free postage - looking forward to fitting and reducing the amount of cleaning / mud being flung all over the place - best regards - thanks  :152:
"Some will have some, some will have none and some will get killed in the rush"

Offline RichardPB

  • Approved Vendor
  • GS Member
  • *****
  • Posts: 11
  • Town / City: Rustington
  • Country: gb
Re: Powerbronze Hot Product - F850GS Rear Hugger
« Reply #2 on: October 21, 2020, 11:21:40 AM »
*Originally Posted by keefcambs [+]
Powerhouse - Just ordered this and the front mudguard extension - got you're 10% discount and free postage - looking forward to fitting and reducing the amount of cleaning / mud being flung all over the place - best regards - thanks  :152:

Thank you for the order.

I've just processed it onto our system. Both items are in stock and ready to ship out.

All the best,
Richard

Offline Matty589

  • GS Pro
  • ***
  • Posts: 249
  • Bike: 2019 F750GS
  • Town / City: Surrey
  • Country: gb
Re: Powerbronze Hot Product - F850GS Rear Hugger
« Reply #3 on: October 22, 2020, 08:34:20 AM »
Got one of these last week. Fits nicely over the back wheel and should provide much better protection than the OEM rubber flap to the rear shock and swingarm. What’s also good is that it doesn’t replace the existing chain guard, so you can still clean around this area easily by removing the guard.

Offline keefcambs

  • GS Member
  • **
  • Posts: 12
  • Bike: GS 850 2020
  • Town / City: Peterborough
  • Country: gb
Re: Powerbronze Hot Product - F850GS Rear Hugger
« Reply #4 on: October 22, 2020, 09:51:48 AM »
Matty - I think if I was doing heavy mud off road I would probably remove it so it gives the mud somewhere to go without damaging the guard or interfering with clearance of the wheel - but hey that's no big job and half the fun  :001:
"Some will have some, some will have none and some will get killed in the rush"

Offline keefcambs

  • GS Member
  • **
  • Posts: 12
  • Bike: GS 850 2020
  • Town / City: Peterborough
  • Country: gb
Re: Powerbronze Hot Product - F850GS Rear Hugger
« Reply #5 on: October 26, 2020, 09:50:52 AM »




Front guard fits good - only thing I changed was the silver small screws to black with a slight shoulder - fits great does the job especially over the wet weekend - did 327 mile ride out on Sunday through the rain and down pour - never an issue - all good, easy to fit
"Some will have some, some will have none and some will get killed in the rush"

Offline keefcambs

  • GS Member
  • **
  • Posts: 12
  • Bike: GS 850 2020
  • Town / City: Peterborough
  • Country: gb
Re: Powerbronze Hot Product - F850GS Rear Hugger
« Reply #6 on: October 26, 2020, 09:59:30 AM »




Rear hugger - if your going to do any off road this rear guard sits very close to the rear wheel - it will either jam up or be ripped off - when fitted I also got a slight vibration noise - so I removed and put some small rubber washers in-between - still had the same noise - so I removed, I also think that using Velcro to fix something in place along the top of the chain guard really is not going to last after a few jet clean downs - I didn't fit - item now up for sale for £70 - my loss someone else's gain - comes with fitting instructions screws bolts and Velcro. ( If your using your bike just as tourer, not off road you will get better use)
"Some will have some, some will have none and some will get killed in the rush"

Offline RichardPB

  • Approved Vendor
  • GS Member
  • *****
  • Posts: 11
  • Town / City: Rustington
  • Country: gb
Re: Powerbronze Hot Product - F850GS Rear Hugger
« Reply #7 on: October 26, 2020, 11:02:38 AM »
*Originally Posted by keefcambs [+]




Rear hugger - if your going to do any off road this rear guard sits very close to the rear wheel - it will either jam up or be ripped off - when fitted I also got a slight vibration noise - so I removed and put some small rubber washers in-between - still had the same noise - so I removed, I also think that using Velcro to fix something in place along the top of the chain guard really is not going to last after a few jet clean downs - I didn't fit - item now up for sale for £70 - my loss someone else's gain - comes with fitting instructions screws bolts and Velcro. ( If your using your bike just as tourer, not off road you will get better use)

Hello,

I apologise for the fact that you are unhappy with your Powerbronze hugger.

If you would like to return the item, please give us a call on 01903 783222 to arrange for this.

Once received back, we will issue you with a refund for the cost of the goods.

I have sent this message to you as a private message as well.

All the best,
Richard

Offline keefcambs

  • GS Member
  • **
  • Posts: 12
  • Bike: GS 850 2020
  • Town / City: Peterborough
  • Country: gb
Re: Powerbronze Hot Product - F850GS Rear Hugger
« Reply #8 on: October 26, 2020, 11:13:42 AM »
Richard - Appreciate the back up, support and offer, very professional  - have sent you an e mail -via sales e mail address - Best regards
"Some will have some, some will have none and some will get killed in the rush"